![]() LPCM 2 Channel Audio (32-192kHz sample rate)ġ00 to 240 VAC, 47-63 Hz, External 12VDC It provides an ETHERNET port for control via IP commands or internal webpage.ĭVI - VGA (640x480) thru WUXGA (1920x1200) HDTV - 480p thru 1080p60 (no interlaced support)Ĭompatible with USB 2.0 and all previous USB standards and data rates. The receiver with IP connectivity is the Model EX-VU1-R-IP. Under the Downloads tab above, a free PC software is available for configuring the system and to upload control commands. Similarly, a simple toggle switch can be connected remotely to activate RS-232 commands for turning an interactive display on and off. When commands are tied to Video, plugging an HDMI source to the wall plate, will set cause the Receiver to issue an on command to the display. Commands can be triggered automatically by detecting video, or manually via the internal WebGUI, or by sensing open and close contact events on the I/O ports. Users can upload RS232 commands to the EX-VU1 to control other equipment such as turning a display on and off. A mini-USB port is also provided for configuration upload from a PC for cases where the Receiver is used also as a control system. The Receiver provides HDMI video output, stereo audio output, 1 USB port, IR output, and a terminal strip with RS232 (for On/Off control of the display) plus 4 programmable digital I/O ports. Simply plug the PC’s HDMI and USB ports to the sender to make them available at the remote receiver. The plug-and-play extender is compatible with all PCs, MACs and Android Tablets and does not require driver installation. For convenience, the wall plate features two USB charging ports. The wall-plate Sender gets its power from the Receiver via the same UTP cable and does not need a separate power supply. They connect using standard CAT5e/6 UTP cabling up to 100 feet (30 Meters) long. The EX-VU1 extender consists of an EX-VU1-WP single-gang wall plate transmitter and an EX-VU1-R (or EX-VU1-R-IP) receiver. ![]() The EX-VU1 can also control other equipment by providing programmable contact closure I/O, RS-232 output, IR output and an optional LAN interface from an internal WebGUI and IP control. ![]() HDMI audio is extracted and is provided as L/R stereo on the receiver. It is ideally designed to be compatible with most interactive displays including the Promethean ActivPanel®. The EX-VU1 is used to extend HDMI video and USB data on a single Cat6 cable up to 100 ft (30 meters). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |